Encoder Products

Optical encoders by ELESTA

E OI R016 (DSET)

The code wheel and sensor board are designed in a way that not only solid shaft but also hollow shaft systems up to 8 mm diameter can be realized. The very low tolerance in the duty cycle and the phase difference between the two signal channels predestine the E OI R016 for systems where high precision is required.
  • Supply voltage 3 V...6 V
  • Supply current typ. 4 mA
  • Rotational speed 12 000 min-1
  • Pulses per rotation (signal edges) 1024 (4096)

E OI R016 (CSH0)

  • Supply voltage 3 V...6 V
  • Supply current typ. 4 mA
  • Rotational speed 12 000 min-1
  • Pulses per rotation (signal edges) 1024 (4096)

E OI R007 (DSET)

The E OI R007 DSET is an optical incremental encoder with an unique code wheel design with high precision reflective system. An outstanding benefit is the low current consumption, easy assembly and its compact design. It is designed to have a low sensitivity to installation tolerances.
  • Supply voltage 3,5 V...6 V
  • Supply current 2 mA...6 mA
  • Rotational speed > 100.000 min-1
  • Pulses per rotation (signal edges) 128

E OI R007 (CSV0)

The E OI R007 CSV0 is a 3-channel optical encoder in an aluminium housing with a length of 13 mm and a diameter of 7 mm. Equipped with two precision ball bearings, the system ensures a high degree of smooth running and a long service life at speeds up to 85,000 rpm.
  • Supply voltage 3,5 V...6 V
  • Supply current 2 mA...6 mA
  • Rotational speed 85.000 min-1 {{ mechperm }}
  • Pulses per rotation (signal edges) 128